Item is a cast metal, 9.5 mm projector for motion picture film. Designed for home use. It has a manual crank to advance the film, and a plug for a projection bulb (105-120 volt). This item is intended for Pathé's proprietary 9.5 mm Pathé Baby film cartridges (the sprocket is centered in the middle of the film between each frame).
Item is a cast metal, 9.5 mm projector for motion picture film. Designed for home use, public performances and clubs, or instructional use in classrooms. It has a 105-130 volt motor. The film gate can be opened to easily thread the film throughout the driving mechanisms. It uses 9.5 Pathé Baby Film (motor drive has centre sprocket)
This projector uses 300 ft. reels (instead of the smaller 9.5 mm cartridges).
Small grey metal splicer for cutting and rejoining 8 mm film strips for at-home editing. Remnants of film strips were found in the splicer along with a crumpled piece of paper with instructions for use.
Item consists of a Kodaslide Merit Projector. It has a 5 inch f/3.5 Kodak Projection Ektanon Lens and uses a 150-watt, 120-volt lamp. It has been made to accept all standard 2 x 2-inch slides. As opposed to other projector models of the time that featured automatic changers that could hold multiple slides at a time, the Kodaslide Merit Projector used an earlier slide-feeding method of inserting each slide individually into the top of the unit.
Item consists of a Kodak Brownie Movie Projector, the first model. The projector was manufactured from October 1952 to February 1955. It is for 8mm film, has an f/2 lens, and a max reel of 200 ft. It originally marketed for $62.50. It has a brown metal and plastic body with a removable protective cover that has an operation manual laminated inside.
Item consists of a Griswold Film Splicer Model R-3 from Jefferson, New York. The serial number is 7065. It was made by Neumade Products Corp., New York, N.Y. Factory, Buffalo N.Y. The body is made of cast iron. For 35mm film.
Item consists of a Kodascope Eight Model 70 8mm motion picture film projector. On the reverse, the projector has a dial for slower to faster projection, and a switch with options Off, Motor and Lamp. It has a grey metal body, and is for use with slow burning film only. On the front of the projector is a threading knob. It has a 1 inch f/1.6 lens.
Item consists of a Cine-Kodak Duo Spicer Outfit complete with film cement, containers, an envelope of mounting screws and strips of practice film, and splicer. Missing applicators. For 8mm and 16mm movies, buth sound and silent.
Item consists of a Kodascope Junior Film Splicing Outfit for 8mm and 16mm film. Included are directions for splicing film, a brush, an applicator, a can of film cement, a jar of film cement, an empty jar, screws and splicer in a black and silver box.
Item consists of a Kodak 500 Projector. It was the considered the most portable Kodak projector yet, weighing just over 4 kilograms and featuring a self-contained carrying case. This item has a Kodak Readymatic Changer system that could hold up to 36 slides, but the Kodak 500 Projector was also made with a metal automatic magazine changer that stored up to 30 slides, allowing purchasers to choose their preferred slide-handling system.
Item consists of a Kodak Complete Outfit of Transparent Oil Colours kit, including oil paints, Instructions for Using Kodak Transparent Oil Colors, and How to Use The Complete Outfit of Kodak Transparent Oil Colors, with a glass palette and application tools in a wooden case. They could be used for coloring contact prints and enlargements.
Item consists of a Kodaslide Projector Model 1A. The item is an improved model of the Kodaslide Projector (produced 1937-1940), the first Kodak slide projector to project 50 x 50 mm glass-mounted transparency slides. Along with improvements made by the Kodaslide Projector Model 1 (produced 1939 to 1947), the first model to accept Kodachrome transparencies in Kodaslide Ready-Mount, the Kodaslide Projector Model 1A provided a sharper, brighter projection and featured a 150-watt lamp, a 4-inch Kodak Projection Ektanon f3.5 Luminized Lens, and single-element heat-absorbing glass as an added measure to help protect the transparency slides during projection.
Item consists of an Ernst Leitz Visoflex Mirror Reflex Attachment & Bellow with a black Hektor 13,5 cm. Includes original carrying case and a mechanical shutter release cable cord.
Item is a small metal timer for taking photographs without having to be near the camera to release the shutter. A cable release is placed into the top of the device, with a plunger that is pushed down realizing the shutter when it pops back up.
Item consists of 10 No. 0 Class M (medium peak) Superflash screw mount flash bulbs manufactured by Sylvania Electric Products Inc. The bulb created 20,000 Lumen per second at 3,800 degrees K.
This collection consists of photographic films, papers and chemicals used by various individuals for amateur or professional purposes. The collection also includes camera accessories, flash equipment, various lenses, exposure meters (light meters) and equpiment used for darkroom processing and printing. This is a growing collection, created to help preserve the materials used for analogue photographic developing, printing and enlarging.
A device to instantly get a photo from a slide, using Polaroid film. Built from plastic material, it allows to insert a mounted slide and be seen on a little screen. The exposure may be adjusted
Item is a clockwork timer that will switch an enlarger On and Off to a preset timefor exposure. A time scale allows settings form 0 to 60 seconds. One can lock a time to repeat it, if neccesary. Includes instruction manual
Item is a Micro-Nikkor 55mm lens is composed of 5 elements in 4 groups with a picture angle of 43 degrees. The distance Item is scale is graduated in meters and feet from 0.241m (9.5 in.) to infinity. Tthe aperture scale is f3.5 to f32. The lens is fitted with black rubber focusing ring front and the filter diameter is 52mm.
Item is a lens in constructed of 8 elements in 8 groups, has an aperture range from f3.5 (4.5) to f22 (32) with a maximum focusing distance of .24 m. The filter diameter is 58mm. A Rolev M.G. 58mm Sky filter is included.
Item has interchanghable mount - similar concept to Tamron's adaptall mount. The item has a Nkion mount adapter.American Allied Impex Corporation manufactured photographic equipment under the Soligor brand commencing in 1956.
Item is a lens for 4 x 5 in. exposures on sheet film Schneider-Kreuznach symmar f6.8/130 mm. lens, Compur-Synchro shutter 1-1/500 sec. Includes 2 other lenses: Scheider-Kreuznach symmar 1:5.6 135 mm, and the other is 1:5.6 240mm. Both have Compur shutters. This camera is considered to be the ultimate for architecture and technical photography. It is still on the market and still used by professionals.
Item is a Trifocal Viewfinder. The earliest Bolex model H motion picture cameras included this viewfinder which could be fitted at the top or on the side of the camera. The field of view is shown for lenses of 3 focal lengths. Field of view is changed by raising or lowering side levers which move magnifying prisms into place inside the viewer. When fitted to the side of the film door, the finder offers parallax correction by adjusting a dial which corresponds to the distance between the subject and lens. The H-16 version shows the angle of view for 15mm, 25mm and 75mm lenses; the H-8 version adjusts for 6.5, 12.5 and 35mm. A serial number is located on the rear of the viewfinder which, in most cases, matches the serial number of the camera to which it is attached.
Item is an Infrared remote control (two pieces, transmiter and receiver) for Ektagraphic slide projectors. These units operates the advance/reverse focus functions function of the projector. Wireless receiver is connected to projector via the wired remote jack. The item comes with original box.
Item is a mechanical shutter with pneumatic operation, includes bulb and tubing. The Packard-Ideal shutter is used behind the lens in large-format view cameras.
Item is an auto-release shutter mechanism for still cameras, which allowed one to take self pictures. By hooking the shoulder of the cable shutter release from the camera into the extended spring clip, an additional 10 second period was available to take the picture after pushing up the release lever. Instructions are attached.
This item is a daylight developing tank, manufactured by Minox and made of bakelite material. The tank comes with two rings to be used in the development of shorter 15 and 36 exposure lengths of film introduced in 1968 and 1969. The thermometer is no longer with the tank. The tank comes with original packaging.
Item consists of a roll of Eastman Plus-X Reversal Safety Film for 16mm cameras in original packaging. It is in a black metal canister sealed with black fabric tape.
Item consists of two darkroom lights. Each has a wooden base holding a metal cylinder that surrounds a darkroom bulb. The power cord is thread through the wooden base to connect to the bulb. Only one still has a bulb. The inside of both metal cylinders has been painted white.
Item consists of a Kodak Reflection-Transmission Color Densitometer Model RT. When using the transmission mode, the densitometer can be used to measure the density of a negative, and when using the reflection mode, it can measure the saturation of a resulting print. This allows for a photographer to choose the correct paper and exposure to make prints with, without the need to experiment with test strips.
Item consists of an Eastman Studio Scale. It has a wooden base, a 6 piece weight set and a plaque that reads Avoirdupois Weight. It was used to facilitate the mixing of chemicals in a photographer's dark room.
Item consists of One Pair Kodak Handy Reflectors ...And One Handy Measure for Picture Making at Night. Included in a yellow and green paper envelope with black text are 2 foldable reflecting cones, 2 metal rings, and ABC intruction cards.
Item consists of a Kodak Floasholder Extension Unit Model B. It is in its original packaging, containing flash holder, clamp, plastic guard, and two 2-way flashguard envelopes.