This item is a plastic black stereo adaptor designed for Robins Industries Corporation's J-33 and J-66 Polaroid cameras. This object also contains the "2 for 1" film saver device. Item comes in its original box with its original manual. Item was intended to capture two identical images from a Robins Polaroid camera to be viewed through the stereo adaptor and create the impression of a three-dimensional image.

Item is a plastic stereo camera typically found through mail order catalogues. For 4.5 x 5 cm exposures on 127 mm roll film. Shutter speed 1/50. Twin f11 menscus fixed focal lenses. Lens are labelled as 1 and 2. Written on item: Bioncular viewfinder patents applied for, coronet 3-D, present use 127 film, to take 8 picture close cover blase over No.1 lens make exposures on every number from 1 to 8, to take 4 pairs stereo picture open cover blase over no.1 lens. make exposures only on odd numbers (1, 3, 5 and 7), use no. 127 roll film.

Item is a plastic three-dimensional stereo camera with binocular viewfinder. This item makes 4 stereo pairs or 8 single images, exposure is 4.5 x 5 cm on 127 mm roll film. The single shutter-speed is 1/50, twin f11 meniscus fixed-focus lenses, lenses are separated by 53 mm. Instructions on how to use the camera on labelled on the back of the object by manufacturer. Item has simple uncoated lenses with flash contacts on the right side.

Item is a single-use 3D camera with original film and box. Camera comes with shutter release, view finder, triple lens, exposure counter and film advance thumbwheel. Item uses high resolution colour film. Prints are processed at manufacturer then sent back to user, as a result the camera comes with self-addressed envelope to the ImageTech processing centre.

Item is a green plastic view master with original box packaging. Three-dimensional colour transparency reel depicts frontier puppets. Reels are interchangeable. Reels are inserted into the top of the view master and switched by the plastic push down lever on the side.

Item is a 46B Visual Survey Telebinocular used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect. Item is metal with a plastic eye piece. A lamp bulb is installed and attached to a power cable. Lamp bulb illuminates backs of stereographs or transparencies when viewed through the eye piece. Patent No. 2557608 made by Keystone View Company. Comes with 4 stereographs made by various photographers and studios such as G.W. Wilson, Underwood & Underwood and B.W Kilburn.

Lists all the stereocards in the series and classifies subjects, before commenting on them. Includes geographical parallels for locations and an index

Item is a wooden and brass stereoscope with wooden hood cover. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect. Item is a box type viewer which folds into it's own storage case. Additional reflector can be placed in adjustable brass arms to illuminate transparencies with its white or mirrored side. Viewer is mounted on underside of the lid case. Once inverted and lowered into the box the base becomes the the cover. Lock on either side designed to hold object in place. Later versions of this object included storage units for both viewer and slides. Such as a vertical model able to adjust the viewer to a convenient height and a horizontal cabinet to house stereoviews.

Written on lenses: Achromatic Smith Beck & Beck; Stereoscope 31 Cornell London.

The form advertises that stereoscopic photographs by Keystone View Co. can now be borrowed at the local library and viewed using the stereoscopic viewers they have available. Brochure outlines what they are, the process and contextualizes the cards, stating that they also carry pictures for rural people. Also includes images of people looking at the cards and a couple pictures of people going through the process to borrow stereocards

This item is a grey and red metal personal viewer with a built in light source to illuminate backs of colour transparencies. Viewer can be adjusted by either knob on the sides or top. The push leaver on the side rotates the images within the reel.

Item consists of an albumen stereograph that depicts a man sitting with a toddler on his lap.

Item is made of red plastic and has a slit to put a slide in. It comes with 4 cartoon pull slides and retailed for $1.29.

Item is a black metal device used to convert regular 35mm SLR cameras to stereo cameras by fitting a mirrored splitter onto the lens. The set comes with a viewer for the resulting 35mm slide photographs.

Item is a blue plastic camera shaped three-dimensional viewer. The 3D viewer has a built-in reel of 7 diametrical, 16 mm colour transparencies of Sesame Street characters teaching the alphabet. Unlike traditional View-Masters, this reel cannot be removed. A small Big Bird with his own camera sits on top of the body of the viewer. This object was designed for children's entertainment and education. A orange push down button on the front of the camera is used to switch scenes. Written on the front of the camera is the Sesame Street Logo.

Item is a metal frame binocular style stereoscope used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect. Item comes with a screw between lenses used to adjust viewer's vision.

Item is made of black plastic. Lens and stereoscopic image fold up from bottom plate that has two black x's on it and reads "Made in England. Design Registered." Comes with a stereograph of a woman beside some trees

Item is made of black plastic. Lens and stereoscopic image fold up from bottom plate that reads "Made in England. Design Registered." Missing backing behind images. Comes with a stereograph of a parade

Item is a black tin magic lantern projector with a handle.

Item is a small black metal magic lantern with wooden base used to project glass slides. Has small detachable cylinder glass lens. Internal gas lamp is used to project slides.

Item is a black Holmes style handheld metal stereoscope viewer hood, adjustable card slide and handle. Handle can bend back onto viewer. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

This item is a Holmes style hand held wood and metal stereoscope with a copper eyepiece. This object was used to view two identical images, or stereographs, as one three-dimensional photograph.

Item is made of teal plastic and has a slit for a small stereoscopic slide to be placed into at the back

Item is a compact, collapsible brown and white tin hand held viewer. Item comes with 50 lithographic stereograph cards of wild and domesticated animals. The first three cards in the collection are a table of contents explaining imagery in stereographs. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

The first business card is for Martin and Gail Bass and provides their address and telephone number and states their interest in Stereoscopic Cards and viewers. The second card is for John Steffen, who heads Eastview Pharmacy, and lists his address and telephone number and his interest in stereoscopic viewers.

Buttons depict an individual looking at a stereoscopic card through the use of a viewer. Other cards appear to be falling. Buttons read "Fort Wayne: The Place For You in '92! 1992 NSA National Convention and Trade Fair, Fort Wayne, Indiana, August 14-16.

Item is a pair of white cardboard 3-D glasses meant to be held in front of one's eyes when viewing print and images. Lenses are red and green

This item is a handheld stereoscope with binocular lenses made from cardboard. The body of the stereoscope is able to extend. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would first be placed in the sliding card holder. Once viewed through the viewer the two images would merge together to mimic a three-dimensional photograph. Object comes with one glass plate stereograph of a elaborately designed baroque room.

This item is an optical drawing device. It was designed to trace images appearing in the reflection of the mirrors. There are two slots on either part of the device to hold templates. The mirror swings back and forth beneath the stand to ensure a better view of the templates. Item comes with original manual titled "When And How To Use The Cheiroscope In Visual Training By Dr. Lee H. Jalonack O.D.F.D.S.F"

Item consists of a stereograph that depicts two circus performers with large balls, that can be stood on or thrown.

This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect. Item is a American style tabletop design made entirely of wood. Viewer lenses and card holder are able to collapse onto the base to be more compact. Shutters cover glass lenses for protection.

Item consists of a colour transparency stereograph depicts a lake with mountains in the background.

Item is a wooden and metal combination graphoscope and stereoscope. Glass is framed by detailed floral carving. Body is able to fold onto itself and stand on a floral engraved stand. Graphoscope is a viewing device used to enlarge photographs and text. Item is a made of a magnifying glass in a wooden frame and can collapse into a compact form. Whereas the Stereoscope was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

Item is a wooden combination graphoscope and stereoscope. The graphoscope is a viewing device used to enlarge photographs and text. Item is a built with a magnifying glass in a wooden frame that can collapse onto itself. Whereas, the Stereoscope was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect. Item has a cut out of a clover leaf on the cardholder. This item comes with a removable viewing lens for the stereoscope. Underneath the body is an extendable handle, this accessory allows for the stereoscope to be either handheld or sit as a tabletop viewer.

Item is a wooden pedestal Holmes style stereoscope. Hood of stereoscope is made of cardboard and adorned with a golden leaf pattern around the edges. Graphoscope is a viewing device used to enlarge photographs and text. Item is a made of a magnifying glass in a wooden frame and can collapse into a compact form.This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect. This object can collapse into a compact form.

Item is a green wood and plastic Correct-Eye-Scope used for vision testing and vision therapy. Item comes with a green wooden base and metal plates designed to hold Correct-Eye-Graphs or stereoscopic like drawings manufactured by Keystone Viewing Company to improve or test vision. A correct-Eye-Graph template would be placed in the sliding card holder, next the user would view the template through the stereoscope and attempt to trace the image displayed. This item comes with two booklets; one booklet designed for the left eye and one booklet designed for the right eye. Booklets are marked as such. Booklets also contain user instructions. The stereoscope is made from a wooden base with metal hooded eye holder similar to the design of a Homles stereoscope.

Item is a cast metal, magic lantern projector for glass lantern slides.

Item is a black tin, electric epidiascope, designed to project both transparent magic lantern slides as well as opaque images and small three-dimensional objects (called an episcope). Inside the lantern is a mirror that can be adjusted using a know on the top of the lantern to direct the light either through the magic lantern lense or through the episcope lens.

Item is a brown handheld electric view master first manufactured by Swayer's Inc and first introduced at the New York World Fair (1939-1940). Once pressed down the lever on the side of the viewer will rotate the reel one frame at a time once pressed. Unlike previous view masters, this view master comes with a built in back light attached to an electrical cord. Once turned on the back light illuminates transparencies on view. Item is made of plastic and metal. Reel has 7 diametrical, 16 mm colour transparencies of The Atlas of Human Anatomy, Head and Neck.

Item is a wooden handheld Holmes styled stereoscope and a red velvet lined aluminium hooded viewer. Hood has floral engravings and branded with the H.C. White Co. medallion in the centre. Handle bends back onto viewer. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

Written on object : Pat'd July 28.03 Pat'd. July.23.03.

This item is a metal stereoscope binocular viewer with extendable legs and mirrored sides. This object was used to view aerial photographs and survey maps of land. In the 1920's Fairchild Aviation became the second-largest manufacturer of commercial air planes and fourth largest aviation organization in the United States of America. Written on item: "No. 40-1749."

Item consists of stereographs depicting famous and other notable figures such as royalty, celebrities, actresses, generals
15 Stereoscopic photographs by Keystone View Co.
7 Stereoscopic photographs by Kilburn Brothers, 8 in association with James M. Davis
16 Stereoscopic photographs by Underwood & Underwood
3 Stereoscopic photographs by F. Jarvis
6 Stereoscopic photographs by Littleton View Co.
2 Stereoscopic photographs by J. G. Royce
2 Stereoscopic photographs by Fritz Luckhardt
1 Stereoscopic photograph by Strohmeyer & Wyman
1 Stereoscopic photograph by C. W. Carter
1 Stereoscopic photograph by Universal View Co.
1 Stereoscopic photograph by F. M. Yeager
1 Stereoscopic photograph by A. M. Plant
1 Stereoscopic photograph by Snap Shot Photo Co.
2 Stereoscopic photographs by H. C. White Co.
1 Stereoscopic photograph by Aaron F. Burtt, Jr.
1 Stereoscopic photograph by E. W. Kelley
1 Stereoscopic photograph by H. E. Strout
1 Stereoscopic photograph by Dr. Stolze & Co.
1 Stereoscopic photograph by J. Gurney & Son
1 Stereoscopic photograph by H. D. Girdwood
1 Stereoscopic photograph by London Stereoscopic Co.
1 Stereoscopic photograph by T. Eaton Co.
1 Stereoscopic Photograph by Quaker Oats Co.
27 Stereoscopic photographs by unidentified publishers
1 series called " A Pilgrimage to See Pope Pius IX" by Underwood & Underwood

Wheels depict famous figures. Item comes with a 16 page colour illustrated booklet

File consists of two sets of wheel type stereographs that depict scenes from The Flintstones cartoon television series. On each envelope back, there is a summary of what the wheel shows. One envelope also contains an illustrated booklet. Packet Numbers are B 520 and B 514.

Card shows a 3-D X-Ray of a Lily. Advertisement for A. G. Richards.

Item is a cardboard stereoscopic viewer. Has instructions printed on the item for focusing and viewing. Distributed by Realist, Inc, Milwaukee, Wisconsin. Patent applied for. Comes with an envelope for a coloured slide

This item is a small viewing device used to enlarge photographs and text, such as carte-de-visite and postcards. Item is a made of a magnifying glass in a wooden frame and can collapse into a compact form.

Mady by the Hautecoeur family firm ca 1886-1889. The inscription says" Ancien Maison Martinet 172 rue de Rivoli, Paris"

Item is a handheld plastic view master containing a reel of 7 diametrical, 16 mm colour transparencies of Old Covered Bridges, New England. It was manufactured by GAF, Corporation in Portland, Oregon, USA. The lever on the side of the viewer will rotate the reel one frame at a time once pressed. Item is made of plastic and metal. Reels are interchangeable and come with a variety of themes.

Item is a handheld red and white plastic View-Master containing a promotional reel of 7 diametrical, 16 mm colour transparencies sold through GAF. The 3D viewer was manufactured by GAF Corporation in Portland, Oregon, USA. The lever on the side of the viewer will rotate the reel one frame at a time once pressed. Item is made of plastic and metal. Reels are interchangeable. In 1939, General Aniline & Film Corporation (GAF) merged with Agfa-Ansco, finally operating under Anitec until 1998. Item comes in original packaging. Written on object : GAF (Canada) Ltd. 70 Alexdon Rd. Drownsview On.

Item consists of a framed silver gelatin silver photograph that depicts a man and a young boy, both looking to the left

This item is a small viewing device used to enlarge photographs and text. Item is a made of a magnifying glass in a wooden frame and can collapse into a compact form. Slide holder is made of floral wooden carvings.

Item is a hand-held wooden viewer, base and handle attached to a metal accordion fold. Handle is able to bend back onto viewer. This sterescope was built with a card holder and hood to protect eyes from additional light that could disrupt the image.

Written on object : Patented Jul 5. 1870 & Mar.26.1878.

Item is a hand-held wooden viewer, base and handle attached to a metal accordion fold. Handle is able to bend back onto viewer. This sterescope was built with a card holder and hood to protect eyes from additional light that could disrupt the image

Item is a handheld stereoscopic viewer made entirely of wood. Item comes with a sliding card holder and handle folds back onto viewer. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images have overlapped to mimic a three-dimensional effect.

Item is a stereoscope set that comes with a black case, wooden handheld Holmes style stereoscope, and 66 silver gelatin print stereograph cards depicting various landscapes, portraits, cultures and landmarks. This object was used for education and entertainment.

This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect. Object also comes with a hand written note by previous owner explaining the provenance of the item. Box contains dividers to house stereographs and is lined with a grey velvet. The stereoscope has a aluminium hood engraved with a floral design on the top. Velvet lines the edges of the viewer’s hood and the handle is able to fall back onto the viewer.

This item is a handheld wooden Holmes style stereoscope. The hood is made of cardboard painted to imitate wood grain. Slide holder is adjustable. Handle is detachable.This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

Written on object : Pat'd Dec.7.1875.

This item is a handheld wooden Holmes style stereoscope. The hood is made of cardboard painted to imitate wood grain. Slide holder is adjustable. Handle is detachable. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

Written on object : Pat'd Dec.7.1875.

This item is a handheld wooden Holmes style stereoscope. The hood is made of metal and engraved with a floral pattern. Lens openings are framed by metal. Red velvet lines the viewer hood. Slide holder is adjustable and handle folds back onto itself. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

Written on object : Pat'd July.

Item is a handheld wooden Holmes style stereoscope with cardboard hood, adjustable card slide and removable handle. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlapped to mimic a three-dimensional effect.

Written on object : patented Aug 13th 1867. JLB is engrave in the eyepiece.

This item is a plastic and metal stereo camera manufactured by Haneel Camera Tri Vision. Camera is able to take three-dimensional and single images. Comes with Lestra-Lite color corrected lens. Features include snap back cover,internal spool to load film. The winding knob on top of the camera turns and secures film. Each camera takes 6 sets of nearly identical pictures on a roll of film. Left (L), Centre (C), and Right (R) are written on the back of the object above three small red windows. L, C, and R are designed to prevent double exposures on film. To take a single image, the lens cap is placed over the left hand lens, then shot, turn the spool, cover the the right hand lens with the lens cap and shot again. The three adjustments on the aperture are marked small F:16, medium F:11 and large F:8.

This item is a Holmes style nickle stereoscope with purple velvet covering the viewer, seated on a pedestal. The body of the item is adorned with floral engravings. Item is compact and collapsible. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect. Item is able to detach from base and become handheld or remain a tabletop viewer. The silver gelatin stereograph that accompanies this object is of an ancient Egyptian temple produced ca. 1904 by Underwood & Underwood Publishers. Image comes with an explanation about the monument.

Item is a Holmes stereoscope with a detachable pedestal made to be a handheld stereoscope or standing stereoscope.Originally designed by Oliver Wendell Holmes (1809-1894), the Holmes stereoscope became the prototype for all stereoscopes of the 19th century. His passion for stereoscope technological possibilities became a significant factor in their widespread distributionThis object was often used for entertainment or education. The sterescope was built with a sliding card holder and hood to protect eyes from additional light. Next, two nearly identical images would be mounted and placed in the holder in front of the viewer. Then the images would be looked at through the viewer and merge together to mimic a three-dimensional object. This image was often referred to as a stereograph.

Item is a wooden pedestal Holmes style stereoscope. The viewer can bend at the base. Hood of viewer has small metal balls decorating the edges. This item was used to view stereographs. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

The other two slides depict unidentified buildings, one has a red car in front of it

Item is a black and green combination viewer and stereoscope with hummingbird and lily pad carvings detailed with minerals. Graphoscope is a viewing device used to enlarge photographs and text. Item is a made of a magnifying glass in a wooden frame and can collapse into a compact form. Whereas the stereoscope was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect. This object can collapse into a compact form.

This item contains a stereograph part of Keystone View Company's series (negative number V13334, number 390 from series 400). It shows three individuals, two seated and one standing, inside of a dwelling. The verso of the card has stereotypical information on Inuit culture and life in Ellesmere Island, Nunavut.

Item consists of a set of wheel type stereographs that depict a variety of scenes from Jasper, Alberta. Views are scenic and focus heavily on nature.

Item is an Ophthalmic Telebinocular Viewer manufactured by Keystone View Co., for use in optometry for vision testing. To be used with Keystone stereoscopic target slides. Item includes metal box, with two stereoscopic photographs of the Grand Canyon. Engraved on object: "Keystone View Co. Meadville. PA. USA. Patented No.1.703.787"

This item is a Keystone Correct-Eye Scope manufactured by Keystone Viewing Company. Item is made of wood, metal and plastic.

Clear plastic stereo protectors for mounts

Item is a wheel type stereograph that depicts the wedding of King Baudouin and Queen Fabiola of Belgium. Scenes include their procession, the ceremony, the new Queen greeting the crowd.

Item is a stereo camera made of metal and plastic. Camera takes pairs of 24 x 24 mm exposures on 35 mm film. Uses f3.5/35 mm lenses. Item comes with brown leather case branded with Kodak on the front and lens cap.

Item is a brown handheld electronic stereoscopic viewer manufactured by Kodak. Lenses adjustment and focus are controlled by a small brown knob on the right and switch on the top of eye lenses.
This 3D viewer was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the cardholder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect. Typically, this object would take transparencies from reels or cards. The light within the object would illuminate the back of the transparency to heighten the experience.

Item is a plastic and metal 3D viewer used to observe reels of Kodak colour three-dimensional transparencies. Knob on the side switches transparencies. Item comes in original box.

Written on box: " For life-like pictures in 3 dimensions. Focus and interocular adjustments, takes all standard stereo mounts, operates anywhere-converts to 110-volt"

Item is a plastic and metal stereo viewer used to observe reels of Kodak colour three-dimensional transparencies. Knob on the side switches transparencies.

Written on box: "Focus and interocular adjustments, takes all standard stereo mounts, operates anywhere-converts to 110-volt"

Item is a Kromskop viewer developed by Frederic E. Ives in 1895. Item comes with 1 monochrome transparency made from 3 colour separation negatives layered together; these transparencies were often referred to as kromograms. Kromograms were known as early examples of colour photography available as both mono and stereo images. A glass monoschrome plate is placed on top of object, when viewed through glass eye holes the image is overlapped with three kromograms making the stereograph appear three-dimensional and coloured. It is built in a staircase-shaped box with two eyeholes on the front. The articulated base allows the viewer to be properly oriented with light. At the back of the object is a tilting mirror. The mirror is designed to redirect light into the virtual window above. Lighting can be controlled so that the colour will not be distorted and take on a dominate colour.

This item is a red collapsible cardboard box stereoscope. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the card holder and viewed through the lenses until the two images would overlap to mimic a three-dimensional photograph. A silver brand is stamped in the top left corner of the box. Object comes with two lithographic stereoscopic postage cards of street life in Paris, French from the early 20th century. Images depict famous french landmarks and people walking amongst traffic.

Written on top of box : La Stereo Carte Brevetee S.G.D.G. Nousvelles Vues Stereoscopiques Avec Leur Stereoscope A Foyer Variable.

Item is a child's, oil lamp magic lantern set manufactured by German company Ernst Planck. The set contains a tin projector, two-part lens, oil lamp, and 12 lantern slides. Instructions for use are printed in German, French, and English on the underside of the box lid, and are as follows:

"Directions for using. Place the Lantern on a table, the lenses facing a smooth white sheet at a distance of about 3-5 feet. See that the wich of the lamp is cut even, then light the lamp which you have filled with petroleum. Let the flame be as large as it is possible without smooting. Put the lamp into the lantern in a way that the screw of the wick is on one side. Now place the slide upside down in the lantern, adjusting the focusing tube by moving it either in or out until the picture is distinctly seen on the white sheet. If the table is at a farther distance, the pictures will be much larger, but not as distinct. The nearer the lantern is standing to the sheet, the more distinct but smaller the pictures will be. The room must be perfectly dark. "

This item is a handheld stereoscope made of wood and covered in leather. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the card holder, next binocular like lenses can be twisted until adjusted to the user's vision. This merges the two images to mimic a three-dimensional effect. A hood on the top of viewer is designed to allow light in & illuminate stereograph. The later is adorned with gold leaf detailing.

Item is a white plastic stereoscopic viewer manufactured by Lestrade in France. Body of the 3D viewer is held together by rivets with a metal advance lever between the lenses. Item used stereo cards cards with transparencies. Cards are inserted through the top of the viewer. Next, user would look through binocular eye holes to see a three dimensional image. Viewer can be used with ambient light. Item comes in original box and with original 1970 catalogue listing all the stereo cards, attachments and other stereoscopic product available through Lestrade.

Item is a white plastic stereoscopic viewer manufactured by Lestrade in France. Body of the 3D viewer is held together by rivets with a plastic advance lever between the lenses. Item used transparency stereocards. First, cards are inserted through the top of the viewer. Next, user would look through binocular eye holes to see a three dimensional image. Viewer can be used with ambient light.

Item is a wheel type stereograph that depicts the World Series of baseball.

1 photo album, with a green/black cover that has a gold border. Images focus on famous locations in Italy

1 photo album, with a blue cover and a gold border. Stereocards focus predominantly on groups, events and some are jokes

1 photo album, with a tan/gold cover. Images focus on people/families, nature and locations

Item is a handheld stereoscope made of wood, metal and fabric. Viewer is adjusted by fabric between lenses. This item is a nontraditional stereoscope model, lacking a hood or sliding card holder. This stereoscope is patented by A.H. Baird, Edinburgh .

Item is a black magic lantern with handle

Item is a handheld stereoscope made from wood, plastic and cardbaord. Item was originally designed as a child's toy. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the card holder merging the two images to mimic a three-dimensional effect. Stereoscope comes with 12 paper black and white stereographs of animals at the zoo. Written on object : Magical Stereoscope.

1 photo album, with a green cover. Stereocards depict people suffering from ailments, often medical, and attempts to heal them ie. pulling a tooth, boredom, a sore foot

This item is a bakelite black 3D viewer with a white push down lever designed to switch three-dimensional reels. The object comes in original blue and white box base. Reels are inserted through the top of the viewer. Next, the user would look through binocular eye holes to see a three-dimensional image. View-Master can be used with ambient light.

This item is a handheld metal and wood Holmes style stereoscope. The metal viewer has flower and leaf details engraved with fabric lining the metal eyepiece. This object was used to view two nearly identical images, or stereographs, as one three-dimensional photograph. The mercury stereoscope was manufactured by H.C. White Company, a main manufacturer of Holmes style stereoscopes. White obtained several patents for his high quality stereographs and stereoscopes. In 1907, White made the most mechanized stereo publishing facility in the world. The entire photo printing process was automatic to ensure a uniform standard. The H.C. White company produced three standard stereoscopes: wood, wood and metal, and all metal.

This item is a handheld metal and wood Holmes style stereoscope. The metal viewer has engravings of flower and leaf details with red fabric lining the metal eyepiece. Slide holder is adjustable and handle folds back onto the viewer. "Mercury Stereoscope Trade Mark" is branded on top of the viewer. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

Written on object : Underwood & Underwood New York Pat'd July 28'02 & May 01'06.

Item is a wooden handheld stereoscopic viewer with a black metal hood. Hood is engraved with floral patterning and branded with The Mercury Stereoscope trademark. The edges of the hood are lined with black velvet. Handle folds back onto viewer. The entire stereoscope is kept within a black box. This item was patented by R.Y. Young an American photographer most known for his stereographs. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

Written on box label : The Stereo - Gothard patented 1901, by R.Y. Young Sold Only By American Stereoscopic Company 725 Broadway, New York.

Item is a hand held metal stereoscope with a wooden handle. Viewer is lined with velvet. Hood of viewer is engraved with leaf design and branded with the TR trademark. Handle is able to bend back onto viewer.This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

Item is a black handheld stereoscope made of metal and attached to a wooden handle. Viewer has no hood. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

This item is a metal pedestal stereoscope with binocular style viewer. Viewer can revolved 360 degrees around pedestal base. Viewer hood has art deco engravings. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

Item is metal stereoscopic viewer. Has the name magicoal fires on the front. Has two lenses

Item is a plastic view master manufactured by View-Master and built in the shape of Disney character Mickey Mouse. Item is in original packaging and comes with promotional l three-dimensional reel of colour Disney scenes featuring Mickey Mouse and friends. Push down lever on the right is used to rotate reel. Reels are interchangeable. Item is designed as a child’s toy.

This item is a miniature wood and plastic combination viewer and stereoscope. Item has two parts that can elevate the viewer and stereoscope to a preferred view. Graphoscope is a viewing device used to enlarge photographs and text. Item is a made of a magnifying glass in a wooden frame and can collapse into a compact form. Whereas the stereograph was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

This item is a hand held stereoscope made of wood and aluminium. The hood of the viewer is adorned with a floral engraving and a seal of a deer. The viewer is lined with velvet. The handle is able to bend back onto the viewer. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect. The hood is designed to keep out additional light.

Written on object: "Manufactured Keystone View Co. Meadville, PA. Patented 1904"

This item is a promotional stereoscopic kit given out by Chevrolet General Motors photography to display interiors and exteriors of their new car line. Each image is titled with the car name. The 3D viewer is black and made from metal and plastic. The viewer comes with a built-in light that requires C batteries. Stereoscopic cards are placed through the slot in the bottom of the stereoscope, next the image would be viewed through the viewer. Lens can be adjusted by the metal knobs on the side to correct vision. A push-down button on the body of the viewer turns on a small internal light bulb which brightens the stereoscopic transparencies. This makes the image easier to see. Box of kit is made from cardboard and leather with snap buttons to open and close. Slots within the box divide and house viewer and stereographs.