Photography--Processing

Taxonomy

Code

http://id.loc.gov/authorities/subjects/sh85101252

Scope note(s)

Source note(s)

  • Library of Congress Subject Headings

Display note(s)

Hierarchical terms

Photography--Processing

Photography--Processing

Equivalent terms

Photography--Processing

  • UF Darkroom technique in photography
  • UF Photographic processing
  • UF Photography-Darkroom technique
  • UF Processing, Photographic

Associated terms

Photography--Processing

50 Archival description results for Photography--Processing

50 results directly related Exclude narrower terms

Film labels

3 papers with torn edges, probably attached to a large format plate holder for film and detached when the film was used. The films were Comet Plates, Portrait Panchromatic for Kodachrome Dry Plates and Autographic Cartridges, all by Eastman Kodak Co.

Eastman Kodak Company

Fotolarger enlarger

Item is a photographic enlarger consisting of nine parts; a metal base, two shafts, one bellows/negative holder assembly with red filter, lens assembly, lamp with cord, and three cardbooard negative guides. Cast into the vertical assembly are the words: "Fotolarger, Testrite, N.Y." On the negative holder, there is a metal plate printed with the CSA logo, and "Fotolarger, use #211 lamp 75 W 110-115 V, Testrite Instrument Co., Inc., New York, N. Y. -- made in U.S.A."

Testrite Instrument Co., Inc.

Marktime

Item is a clockwork timer that will switch an enlarger On and Off to a preset timefor exposure. A time scale allows settings form 0 to 60 seconds. One can lock a time to repeat it, if neccesary. Includes instruction manual

Photolab envelopes

Packaging for photographs, used by various photolabs or photographic developers to deliver finished prints to the consumer. All used, open and empty.

Kodak Canada Inc.

Eastman Studio Scale

Item consists of an Eastman Studio Scale. It has a wooden base, a 6 piece weight set and a plaque that reads Avoirdupois Weight. It was used to facilitate the mixing of chemicals in a photographer's dark room.

Image Arts

Kodak Reflection-Transmission Color Densitometer Model RT

Item consists of a Kodak Reflection-Transmission Color Densitometer Model RT. When using the transmission mode, the densitometer can be used to measure the density of a negative, and when using the reflection mode, it can measure the saturation of a resulting print. This allows for a photographer to choose the correct paper and exposure to make prints with, without the need to experiment with test strips.

Image Arts

Griswold Film Splicer Model R-3

Item consists of a Griswold Film Splicer Model R-3 from Jefferson, New York. The serial number is 7065. It was made by Neumade Products Corp., New York, N.Y. Factory, Buffalo N.Y. The body is made of cast iron. For 35mm film.

Image Arts

Kodak wooden developing tank

Item consists of a wooden box used for black and white film developing, containing a stainless steel round metal film tank and reel for 120mm film, 2 handles for film winding that fit through holes in the box, 1 film spool, and a metal instrument. A metal spool holder is mounted to the inside of the box. To use the developing tank, the film backing paper is attached to a spindle in the wooden developing tank, along with a light-tight cover, all of which are wound onto the spindle. The spindle is then transferred to the metal developing tank to be processed.

Source: Early Photography (2019). Roll-film developing tanks. Retrieved from: http://www.earlyphotography.co.uk/site/entry_D70-X.html

2 Darkroom lights

Item consists of two darkroom lights. Each has a wooden base holding a metal cylinder that surrounds a darkroom bulb. The power cord is thread through the wooden base to connect to the bulb. Only one still has a bulb. The inside of both metal cylinders has been painted white.

Image Arts

Kodak Developing and Printing Outfit No. 2

Item consists of a cardboard box containing materials necessary to develop film and print black and white photographs at home. Items include a Kodak candle lamp darkroom light, glass chemical stirrer, glass measuring cup, darkroom thermometer, 3 black enameled printing trays, black enameled adjustable printing frame for 95 x 150 mm (3.75" x 6"), 95 x 95mm (3.75" x 3.75"), and 65 x 95 mm (2.5" x 3.75") prints. The set includes the original yellow Kodak box, and an insturction booklet for the use of the set.