Item is a hand-held metal and leather motion picture camera for filming motion pictures on 16mm film. Includes a 25mm f/2.3 Kodak Ektanon Lens and adjustable viewfinder.

Item consists of a single lens reflex Auto Graflex camera for 3.25 x 4.25" plates or film sheets. It has a disappearing Bausch & Lomb 166mm f/4.5 lens, a collapsible viewing hood and a cloth curtain New Simplified Focal Plane Shutter with speeds up to 1/1000 sec. It was made by the Folmer & Schwing Division of the Eastman Kodak Company, in Rochester, New York from 1907-1923. Two other models of the same camera were made and sold at the same time, one for 4x5" plates and one for 5x7" plates.

Item is a brown Kodak Stereo Camera for two 23 x 24 mm exposures on standard 35mm cartridge film. The camera had a built in sprit level to ensure ideal stereo effect was achieved. Kodak produced a corresponding Kodaslide Stereo Viewer and proprietary stereo slide holders for images shot with this camera. Lenses are Kodak Anaston F3.5/35mm with a Kodak Flash 200 shutter. The viewfinder is between the two lenses.

Item is a four-lens, three-dimensional camera developed by Jerry Curtis Nims and Allen Kwok Wah Lo and manufactured in the UK. The camera has a plastic body and 4 identical lenses, coupled with a shutter that exposes the four square images in synch. When exposed, 35mm film was sent to the Nimslo Co. in England and a few other specialty labs. The customer received developed, autostereo (lenticular) colour prints, which allow a true stereo image without the use of glasses. This process was also developed by Nims and Lo.

Item is a stereo camera produced in the early 1950's when the format became widely popular with amateur photographers. The camera uses 35mm film, has 2 anastigmat lenses, 3.5/35mm with a shutter speed of 1-1/150. The camera has a flash synch on the top.

Item is a typical handheld camera using 5.7 inch roll film. The transport is by a built-in clockwork (one shot at a time) to be wound by a large lever at the left of the body to generate a flat film plane. Some suction is generated during exposure. Shutter is made by Ilex (Rochester NY) 1/125, 1/250, 1/500 sec.The lens is also by Ilex Optical Co - Paragon Anasigmat f6.3. Accessories include 1 38mm Yellow Filter and 2 Metal Slides.

Item consists of a Falcon Miniature made in New York by Utility Manufacturing Company. It is a 127 film camera with a half frame viewfinder and a black Bakelite body. It has a Wollensak Minivar 50mm lens with fixed aperture and fixed focus, a one speed (1/25 +B) rotary shutter, a simple optical viewfinder and a spare film compartment.

Item is a mock twin lens reflex camera with Bakelite body and metal fittings, for use with 620 roll film. Designed to mimic the look of a twin lens camera, the topmost "lens" is in fact a brilliant viewfinder. Camera has a fixed focus Kodet lens.

Item is an Ansco Clipper 4.5 x 6 xm rollfilm camera. It is a simple, fixed focus, point and shoot camera with a black body and expandable lens board.

Item is a plastic box style camera for use with 127 roll film film. It is a simple, fixed focus, point and shoot camera with beige and brown body and plastic lens. Includes a hot shoe for AG-1 flash bulbs.

Item is a box camera for 3.25 x 5.50 inch exposures on 125 mm film. It has a meniscus achromatic lens, a rotary shutter with three stops, two tripod sockets, and two brilliant finders. There is a focus lever on the side of the camera to set proper focal distance. After the focus is set, there is a button to press and the camera will open to proper distance focused and ready.

Item is a black leather wooden box-style magazine camera for 4x5 inch plates. The camera has a meniscus lens, a time and instantaneous shutter, and two reflecting type viewfinders. This camera model was made by the Western Camera Manufacturing Company prior to 1899 when it became part of the Rochester Optical & Camera Company.

Item is a small strapless box camera with a single viewfinder that uses 127 film for 4x6.5cm exposures. Some versions are identified "Ansco Dollar Camera" on the front but this specific one only has "Ansco" on the front. This model also came in black, green, and red. The red version with a strap is known as the "Kiddie Camera".

Item is a box-type camera for 4x5 inch plates in double plateholders. The wood boy is covered with genuine black leather. It has two viewfinders, a rotating diaphragm with three apertures, a single meniscus lens, and two tripod sockets.

Item is a manual plate changing box-style camera. It holds 12 steel plateholders inside the top door compartment behind the plane of focus. Holders have to be manually inserted into a slot. The camera has an achromatic lens with three diaphragm stops, two viewfinders, an aperture scale from f16 to 45, and a time and instantaneous shutter.

Item consists of a Premo 4x5 inch plate camera with 1 plate holder within. This camera opens a the top for reloading. It has a [stiff] safety shutter, a two speed shutter, two viewfinders, an adjustable diaphragm, and two tripod sockets. The plate holder has the following writing on it "The Premo Camera Patent July 19, 1890 Other patents pending."

Item consists of a Kodak Fiftieth Anniversary Brownie box camera. It was a commemorative edition Brownie camera that was handed out to children at fairs in the United States during the 1930s. The body of the camera is card covered in brown leatherette, and features a silver seal for the fiftieth anniversary of the Eastman Kodak Company, from 1880 to 1930. It is a simple camera that used 120 medium format film.

Item consists of a Six-16 Brownie box roll film camera that used size 616 film to make pictures sized 6.35 x 10.8 cm. It has a Diway lens with a close-up lens and a rotary shutter. The body is metal covered in leatherette, with a unique geometric art-deco front panel and two brilliant finders.

Item consists of Six-20 Brownie Junior box 620 roll film camera. This Brownie camera improves on the Kodak series manufacturing, with a metal body and an Art-Deco front face. It has a rotary shutter and a meniscus lens and two reflecting finders.

Item is an Ansco Cadet 127 roll film camera. The design of this camera was made to compete with the Kodak Brownie Star series, including similar three-point flash contacts. The camera features an Anscar Lens and a dial to switch between black and white and colour. The body is black plastic.

Item is a simple, red, Bakelite camera for 6 x 6 cm (2.36" x 2.36") exposures on 620 film. The design includes a fixed focus, single aperture and one shutter speed. There are connection points for a flash unit, and a dimpled metal plate on the front, perhaps intended to mimic the apperance of a selenium light meter.

Item consists of a Kodak No. 2-C Brownie Model A box camera. The camera used 130 roll film for an image size of 5.715 x 10.795 cm. It has a standard Meniscus achromatic lens and a rotary shutter.

Item consists of a Kodak Pony 828 camera. It is a small format camera with a simple viewfinder, Kodak Flash 200 1/8-1/200 shutter, 51 mm f/4.5 Kodak Anaston Lens, and knobs for film advance and rewind. It uses roll film, but 35mm in width.

Item consists of a Kodak Bantam Rangefinder Camera. It makes 28x40mm exposures on Kodak's type No. 828 special 35mm paper backed roll film. It has a non-self-cocking Flash 300 shutter, 50mm f/3.9 Kodak Ektanon Lens, an optical viewfinder with a superimposed rangefinder, and is made of brown plastic, aluminum and other metal.

Item consists of a Kodak Medalist I. It is a 620 film, with a bright finder than attempts to combine the magnified rangefinder and the minified viewfinder. The camera was built during the war and was nicknamed the American Leica, for the design criteria that good pictures could save the lives of soldiers, and the Medalist could take them. It is a medium format, roll film camera with a sharp, multicoated lens, and a rigid aluminum and steel body. The camera has a unique double helical lens tube in place of cloth bellows.

Item consists of an 1899 model of the No. 2 Bulls-Eye Kodak, which was manufactured from 1896-1913. It has a wooden interior, a spring controlled rotary disc shutter, and rotating disc stops controlled by pulling a lever on the top of the camera.

Item is a simple, grey Bakelite camera for 6 x 6 cm (2.36" x 2.36") exposures on 620 film. The design includes a fixed focus, single aperture and one shutter speed. There are connection points for a flash unit, and a dimpled metal plate on the front, perhaps intended to mimic the apperance of a selenium light meter.

Item is a wooden box camera with leatherette covering for large 8.25 x 10.8 cm (3.25 x 4.25") exposures on 124 film. The design is simple, with a fixed focus and shutter speed. The roll film was advanced past the lens manually with a small crank. The original sales price was $4.00.

Item is a No. 3A Folding Buster Brown camera used to make postcard sized exposures on roll film.

Item is a self-erecting folding amateur camera for 8 exposures of 5.7 x 8.25 cm (2 1/2 x 4 1/4") on 620 roll film. Lens is an f4.5 with a Kodamatic shutter. This camera originally sold for $31.00 in the United States, this model was assembled by the Canadian Kodak Company, at the Weston plant in Toronto.

Item consists of a Kodak Junior Six-16 Series II folding camera. It used Kodak 616 film rolls and has a Kodak Anastigmat f6.3/126mm lens with a Kodak No.1 Kodex leaf shutter.

Item consists of a Kodak Bantam. It is a folding camera that used Kodak's 828 film format. It is a black compact camera with a Kodak Anastigmat Special f-4.5 47mm lens and a folding frame finder. It was a very common camera.

Item consists of a Kodak Bantam. It is a folding camera that used Kodak's 828 film format. It is a black compact camera with a Kodak Anastigmat f-6.3 53mm lens, a rigid finder, and a plastic body.

Item consists of a Kodak Vigilant Junior Six-20 folding, 620 film camera. It has a Dakon lens.

Item consists of a Kodak Tourist II Camera. It uses 620 film and makes 8 6x9cm frames. The lens is a Kodak Anaston f:4.5 105mm, and the shutter is the Flash Kodamatic, although there were many different lens/shutter combinations available. It has an eye-level viewfinder and an aluminum film advance knob. It is one of the last styles of Kodak folding roll film cameras. The Tourist II features a new viewfinder and redesigned top cover from the original Tourist, and allows for an optional 828 roll film adapter.

Item consists of a Kodak Bantam f5.6 model 828 film camera. It is a compact folding camera with an f:5.6 50mm Kodak Anastigmat lens.

Item is a typical Kodak folding roll film camera for 620 film. The simple Kodak shutter allows T, B, and I. The Kodet lens goes from F1:12.5 to F:32. The non-optical viewfinder is a folding frame type, there is also a brilliant viewfinder. The camera comes with manual and box.

Item is a folding autographic camera that allowed one to write on the negative using a metal stylus. Photos were taken on 120 roll film. In 1917 the ends were changed from a squared to rounded version, and the No. 2A was produced with the rounded ends until 1926.

Item is a typical mass-produced, self-erecting, folding roll film camera for amateur use. Made 8 5.7 x 8.25 exposures on 620 roll film, but could be converted for other formats with the Kodak Tourist Adapter Kit.

Item is an unopened package of one dozen 4x5 glass plate negatives. Stamp on back indicates best used by October 5, 1935.

Item is a box of 9 x 12cm metal film sheaths to put cut film into plate cameras.

Item is a tube containing chemicals that were to be dissolved in water to develop prints for film and plates.

Item is a clockwork timer that will switch an enlarger On and Off to a preset timefor exposure. A time scale allows settings form 0 to 60 seconds. One can lock a time to repeat it, if neccesary. Includes instruction manual

Item is a light-tight black bag used to load shot photoraphic film into processing tanks for developing.

Item is a developing tank, composed of black Bakelite. Sytem comes with original box and user guides.

Item is a wooden film developing tank.

Item comes in an original box with instruction sheet. The crank to advance film on to the cassette is missing.

Item is a selenium cell type light meter. Working condition, selinium cell is weak. Incident light attachement is missing

Item is an inexpensive selinium cell typelight meter. Working condition. To be used with model 95b Polaroid land camera. Comes with box.

Item is an extinction exposure meter for motion picture cameras.

Auto transitor sets flash intensity, automatic to camera conveyed by hot shoe or cable. Uses AA batteries. Includes box, owner's manual and warranty.

Item is an Infrared remote control (two pieces, transmiter and receiver) for Ektagraphic slide projectors. These units operates the advance/reverse focus functions function of the projector. Wireless receiver is connected to projector via the wired remote jack. The item comes with original box.

Item is a mechanical shutter with pneumatic operation, includes bulb and tubing. The Packard-Ideal shutter is used behind the lens in large-format view cameras.

Item is an auto-release shutter mechanism for still cameras, which allowed one to take self pictures. By hooking the shoulder of the cable shutter release from the camera into the extended spring clip, an additional 10 second period was available to take the picture after pushing up the release lever. Instructions are attached.

Item is a circular brown plastic view master with binocular shape viewer. Item comes with one reel of 7 diametrical, 16 mm colour transparencies of Niagara Falls, New York. Item opens and closes with lock at the top. Lever is designed to rotate transparencies.

Item is a brown plastic 3D viewer built with a push-down lever between the lenses. The lever is designed to rotate a reel containing three-dimensional black and white 35 mm acetate film manufactured by Tru-Vue Company. Images are inserted through the slot on the left side of the lenses. Item comes with square plastic windows to illuminate backs of transparencies on view. Once the film is circulated, it rewinds itself on the right hand side of the viewer. Item comes in original box with 4 original films depicting Pikes Peak Region and Depth Photography. Item also comes with instructions on how to use the Tru-Vue set and an additional business reply card with more instructions for the camera.

Item is a brown plastic 3D viewer built with a push-down lever between the lenses. The lever is designed to rotate a reel containing three-dimensional black and white 35 mm acetate film manufactured by Tru-Vue Company. Images are inserted through the slot on the left side of the lenses. Item comes with square plastic windows to illuminate backs of transparencies on view. Once the film is circulated, it rewinds itself on the right hand side of the viewer. Item comes in original box with 6 original films depicting the Golden Gate Exposition and San Francisco’s major landmarks. Item also comes with original pink catalogue explaining how to use the Tru-Vue and how to order new film, as well as a business card for True-Vue Inc, that is also an order form. Written on object : Tru-View Rock Island, Ill. U S PAT. 90564 Made in U.S.A. Written on box : Tru-Vue Ins. Pictures With Depth Rock Island Illinois Printed And Made In U.S.A.

Item is a handheld plastic view master containing a reel of 7 diametrical, 16 mm colour transparencies of Old Covered Bridges, New England. It was manufactured by GAF, Corporation in Portland, Oregon, USA. The lever on the side of the viewer will rotate the reel one frame at a time once pressed. Item is made of plastic and metal. Reels are interchangeable and come with a variety of themes.

Item is a Kodak Panoram No. 4, model D. It is a large box camera in black leather casing that features a swivel lens that rotates as the camera box remains stationary to make a panoramic exposure of up to approximately 110 degrees.

Item consists of a Kodak Advantix C700. It is an advanced photo system camera that is fully automatic, with self timer and date and time printing. It features an auto-focusing 30-60 mm zoom atmospheric lens and a built-in flip-up flash unit. Silver in colour. Uses 1 3-volt lithium battery. Allows for three different picture sizes: classic, group and panoramic.

Item consists of a Kodak Advantix C650. It is an advanced photo system camera that is fully automatic, with self timer and date and time printing. It features a zoom 24-48mm ektanar atmospheric lens and a built-in flash unit. Silver in colour. Uses 1 3-volt lithium battery. Allows for three different picture sizes: classic, group and panoramic.

Item consists of a Kodak KD65 Auto Focus 35 mm film camera. It features a 28 mm f/8 2-element ektanar lens, a fixed shutter shutter speed of 1/100 sec., a panoramic format option, and a built in flash unit. Uses 1 3-volt lithium battery.

Item is a brown plastic 3D viewer built with a push-down lever between the lenses. The lever is designed to rotate a reel containing three-dimensional black and white 35 mm acetate film manufactured by Tru-Vue Company. Images are inserted through the slot on the left side of the lenses. Item comes with square plastic windows to illuminate backs of transparencies on view. Once the film is circulated, it rewinds itself on the right-hand side of the viewer. Item comes in original box with 4 original films depicting the Grand Canyon's major landmarks.

Written on object : Tru-View Rock Island, Ill. U S PAT. 90564 Made in U.S.A. Written on box : Fifty-Six Scenes Of The Grand Canyon Of Arizona In Three Dimensional Photography.

Sub-sub-series contains publications produced by Kodak for the consumer between 1940 and about 1995. Publications are pamphlets ranging from 1 to over 50 pages and intended to be stored in a series of specialized binders. The information pamphlets were published in series with an alpha numeric code, which form the sub series in this collection. Customers subscribed to receive updates based on their specific interest. Early publications, from the 1940's, were simply titled "Kodak Photographic Handbook" and later versions included: Kodak Reference Handbook, Kodak Industrial Handbook, Kodak Color Handbook, Kodak Graphic Arts Handbook, Kodak Professional and Industrial Data, and Kodak Scientific and Technical Data.

Each pamphlet has a unique, alpha-numeric Pamphlet Number, following classification scheme devised by Kodak to make ordering and subscription easy for clients. Schema is as follows:
A - Amateur Photography (also under KW)
AV - Audiovisual Programs from Kodak
B - Filters
C - Arctic Photography
CC - Publications about Kodak
D - Microfilming and Reprography Materials (also under P); Dental Radiography
E - Color Photography
F - Black and White Film
G - Black and White Papers, Industrial Photography, and Instrumentation
H - Motion Picture, TV Applications (also under D and S)
J - Chemicals, Processing, Silver Recovery, and Waste Disposal
JJ - Kodak Laboratory Chemicals
K - Darkroom Design and Construction
KW - Amateur Photography )see section A also)
L - Index
LC - Library of Creative Photography
M - Aerial, Applied, and Medical Photography
N - Medical and Scientific Photography
O - Professional Studio Photography
P - Instrumentation and Industrial Photography (see section G also)
Q - Graphic Arts
R - Exposure and Processing Guides
S - Audiovisual Applications (also under T and V)
T - Audiovisual, Education, and Professional Video Tape Products (also under AV, and V)
TD - Graphic Arts (see sections G, P, and Q also)
U - Optical Materials
V - Audiovisual (also under AV, S, and T)
W - Industrial Radiography, Chemistry
X - International Publications
Y - Processing and Equipment Record Forms
Z - Processing Monitoring Systems, Self-Instruction Materials, Literature Library Collections

Item is a collapsible print making system for amateur use. Designed to concentrate daylight to make 5" x 7" prints from 2.25 x 3.25" negatives. Original packaging and users guide is included.

Item is a single contact screen in a printed cardboard folder, manufactured by Eastman Kodak Company, used to produce half-tone images.

Item is a printed transparency, produced by Eastman Kodak Company in 1968, designed to assist in the production of contact reproductions of lines and halftone negatives or positives. In printed envelope with accompanying instructions.

Item is a Kodak T-14 control scale reference strip, produced by Eastman Kodak Comapny, designed to help calculate and monitor the exposing and processing of photographs. In printed envelope.

Item is a contact printing frame, manufactured by Eastman Kodak Company.

Item is a steel, winding timer used in photographic printing to time exposures. Originally sold for $5.00.

Item consists of a paper sleeve containing "(Nitrate) One Kodaloid Printing Mask" for 1 5/8 x 2 1/2 inch film negatives.

Item consists of a narrow and tall Eastman Plate Tank, used in processing glass plate negatives. It features an embossed timer on the front.

Item consists of a 2MB Kodak Picture Card. It could be used to store and share digital pictures. Works with standard CompactFlash ATA compatible digital cameras. In original packaging.

Item consists of a sleeve for two dozen 3 1/2 x 3 1/2 inch Eastman Kodak Co. Solio Paper for export. A sticker on the front of the envelope reads "Cochran / Photo Supplies. / Hamilton, Ont." and stamped on the verso (extremely faded) reads: "This paper will not be [illegible] for / any fault of manufacture after / APR 27 1900 / EMULSION NO. 18758 / PACKED BY NO. 26".

Item consists of an empty carton for Kodak Photographic Paper. Expiry date is stamped November 1, 1945.

Item consists of an empty box for Eastman Films. Inscribed in pencil on lid reads: "Number 57 to 83 / September 15 to Nov 20 / /94".

Item consists of two 16mm magazines loaded with Kodak film.

Item consists of an 8 exposure roll of Kodacolor II Color Negative Film for Color Prints C828 in original packaging. Develop before date is January 1977.

Item consists of a 8, 12, or 16 exposure roll of Daylight (ASA 80) Kodacolor II Color Negative Film C616 in original packaging. Develop before date is March 1977.